The Choker combat model is based on a light weight and strong wiffle ball bat. The model can be
quickly constructed and will survive the dirtnaps, hard landings and midairs that combat can dish out! The
plane can be set up to be slow and stable or throttle up and dial up the throw with a more tail heavy
configuration for some wild combat maneuvers! The short fuselage is more like a flying wing and can be
disorientating to new flyers. Recommended for experienced pilots!
What you get:
CNC cut wing and wing saddle of high load 40 blue foam with slots precut to accept the spars
and LE reinforcements. Choice of E479 or S8036 airfoil for Chokers. Mini-Choker
uses E203
Bat fuselage with slots for tailfeathers precut
Wing riser
CNC routed polyethylene firewall
CNC cut fuselage stiffener
fiberglass wing spars with joiners
UHMW 1/4" leading edge reinforcement
coroplast tail feathers
hard balsa trailing edge and aileron wood
mounting dowels and holders
What you need:
3 channel radio with servo's
.15 to .30 engine with throttle control
pushrods and connectors
3 control horns
6 oz round sullivan fuel tank
Probond polyurethane glue (also known as Gorilla glue)
epoxy or foam safe CA
Goop adhesive (any kind) or Zapadapagoo or silicione adhesive
covering material
basic hobby tools
Cost is: $45 for a single kit. Plus $6$shipping
$80 for a double kit. Plus $8 shipping
Bulk packed kits with a minimum order of 4 planes is $35 per kit. Call or e-mail for shipping
